Welcome to ICT store

Connect with Facebook


Product Description

3COM 3CR990B-FXLP-97 10/100 Secure Fiber-FX Network Interface Card, Low Profile

Be the first to review this product

Condition: Refurbished
Packaging: Single Box
UPC: 6.62705E+11

Availability: Only 0 left




Double click on above image to view full picture

Zoom Out
Zoom In


  • Works with fiber-optic cabling to extend operating distances, lower electrical interference, and resist packet sniffing
  • Secures sensitive data at wire speeds - with DES/3DES encryption, MD5 and SHA-1 hashing, RFC 2402 authentication, and up to 75 Security Associations
  • Hardware-enforced security features meet FIPS 140-2 criteria; NIST approval pending
  • Supports larger packets - segments TCP frames for the Ethernet MAC and adds TCP sequence numbers to each packet
  • Uses flow control to reduce lost packets and retransmissions for more efficient data transfer between the NIC and switch
  • Responds to router-based management requests from sleep mode to help resolve IP address-aging issues


Bus:32-bit, 33 MHz PCI
Cabling:Long-wavelength fiber-optic cable (1300 nm), 50 µ/125 µ or 62.5 µ/125 µ multimode fiber
Operating distance:Full-duplex up to 2,000 m (6,560 ft), half-duplex up to 412 m (1,351 ft)
Onboard processor:ARM9 security processor, 100 MHz RISC
Security offloads:168-bit 3DES, 56-bit DES, SHA-1, MD5, RFC 2402; up to 75 security associations
Other offloads:TCP segmentation, TCP/UDP/IP checksum
Network protocols:TCP/IP, ISO 8802-3
Standards compliance:PC 99, WfM 1.1a/2.0, ACPI 1.0, DMI, PXE 2.0, RIS, IEEE 802.3, PCI 2.2, FIPS 140-2 (pending)
Drivers:Linux 2.4/Red Hat 7.3-9.0; Microsoft Windows 2003 Server, 2000, XP, NT 4.0; Novell NetWare 5.x, 6.x
Management:SNMP manageable; 3Com Managed PC Boot Agent
Physical Dimensions:length, 13.34 cm (5.25 in); width, 6.35cm (2.50 in)
System Requirements:PCI-2.2 compliant systems
5 V or 3.3 V signaling environments
Fiber-optic cabling and switching