Welcome to ICT store

Connect with Facebook

H3C-0235A24U

Product Description

H3C 0235A24U (S5500-28F-EI) 24 SFP Gigabit Ports, 8 10/100/1000 BASE-T Ethernet Ports (Combo) and Two Extension Slots (AC Model). Alternative name: 0235A24U-US

Be the first to review this product

Condition: Used
Packaging: Bulk
UPC: 6934648002406

Availability: 83

$1,500.00

OR

Quick Overview

H3C 0235A24U (S5500-28F-EI) 24 SFP Gigabit Ports Switch

H3C-0235A24U

Double click on above image to view full picture

Zoom Out
Zoom In

Features

  • The H3C S5500-EI series supports two extension slots and each slot supports 1-port or 2-port 10GE extension modules to further support 10GE interfaces for bandwidth update, thus maximally protects the user's investment.
  • The S5500-EI has already passed the second phase of IPv6 Ready Forum certification; the most authoritative worldwide. The S5500-EI supports abundant IPv4 and IPv6 L3 routing protocols, multicast protocol and policy routing mechanism for a smooth upgrade from IPv4 to IPv6.
  • The H3C S5500-EI Series supports EAD (Endpoint Admission Defense). It enhances the proactive defense capacity of network terminals, and restrains the spread of viruses and worms in a network. Additionally, it disables the access authority of terminals that fail to meet the security requirements, preventing insecure terminals from endangering the entire network.
  • The H3C S5500-EI Series also supports 802.1x, centralized MAC address authentication. H3C S5500-EI Series can Perform 802.1x authentication and MAC address-based authentication simultaneously.
  • The H3C S5500-EI series provides enhanced ACL and supports ingress- and egress-ACLs as well as VLAN-based ACL. In addition, the S5500-EI series supports the Unicast Reverse Path Forwarding (uRPF) to effectively eradicate the ever-increasing phenomenon of source-address spoofing in today's networks.
  • The S5500-EI series provides equipment-level and link-level reliability protection. All switch models support 1+1 redundancy power supply. Among them, the S5500-28F-EI supports pluggable modular redundancy power supplies. Moreover, the switch supports fault detection and alarms for power supply and fans, and can automatically adjust the speed of fans according to temperature changes. All these features enable this box switch series to provide the high reliability of a conventional chassis switch.
  • The H3C S5500-EI series supports STP/RSTP/MSTP. H3C S5500-EI series also supports Smart Link to provide rapid convergence capable of fast convergence time of 50ms.The H3C S5500-EI series supports H3C's rapid ring protection protocol (RRPP). RRPP is an Ethernet ring-specific link layer protocol that features rapid topology convergence, regardless of the number of nodes on the Ethernet ring.
  • The switch supports the Power over Ethernet (PoE), Voice VLAN technology, which identifies voice streams at its ports and adds the corresponding access port to the Voice VLAN. By setting the Voice VLAN security feature, the switch will only permit voice traffic to pass and thus effectively prevent burst traffic from impacting the voice traffic inside the Voice VLAN.
  • H3C S5500-EI series supports L2~L4 complex flow classification based on the source MAC address, destination MAC address, source IP address, destination IP address, port, protocol or VLAN. It provides flexible queue scheduling modes: Strict Priority (SP), Weighted Round Robin (WRR) and SP+WRR; supports the Committed Access Rate (CAR) function with the minimum granularity of 64 kbps; and also supports port mirroring in the outbound and inbound directions
  • H3C S5500-EI series supports SNMP (Simple Network Management Protocol) v1/v2/v3. It supports universal NM platforms like Open View and the H3C iMC (Intelligent Management Centre). It facilitates equipment management by supporting CLI, Web NMS, Telnet and HGMP, and supports SSH2.0 which make management much safer.
  • The H3C S5500-EI series supports MAC-based VLANs. It also supports the sFlow function and can randomly sample the inbound and outbound packets
  • H3C S5500-EI supports H3C IRF2 technology, which virtualizes multiple devices as one logical device. This offers great advantages in reliability, distributed deployment and easy management.
  • Using patented route hot standby technology, H3C S5500-EI provides redundancy backup of all data information on the control plane and the data plane as well as uninterrupted L3 forwarding in the entire virtual framework. This greatly enhances the reliability and performance of the virtual fabric, eliminates single-point failures and avoids service interruption.
  • H3C S5500-EI employs distributed inter-device link aggregation technology to provide multiple uplinks for load sharing and backup. This improves the redundancy of the entire network architecture and the utilization of link resources.
  • The entire resilient framework uses only one IP address for management purposes. This simplifies network device management and network topology management, improves operating efficiency, and lowers maintenance costs.

Specifications

Switching capacity (Full duplex):128 Gbps
Throughput:95.2 Mpps
Service ports:24 Gigabit SFP ports
eight 10/100/1000 BASE-T Ethernet ports (Combo)
Extension slot:2 extension slots
Optional interface modules:1-port 10GE XFP interface module
2-port 10GE XFP interface module
2-port 10GE CX4 interface module
2-port SFP interface module
Stacking:Support IRF2
Support up to 9 stacking devices
POE (Power Of Ethernet):No
Port aggregation:Support LACP
Support manual aggregation
Support at most 14/26 aggregation groups, each supporting at most 8 GE ports or 4 10GE ports
Flow control:Support IEEE 802.3x (full duplex)
Support storm suppression based on port rate percentage
Support storm suppression based on PPS
VLAN:Support port-based VLAN (4k VLANs)
Support MAC-based VLAN
Support protocol-base VLAN
Support QinQ, Selective QinQ
Support VLAN Mapping
Support Voice VLAN
Support GVRP
Layer 2 Reliability:Support STP/RSTP/MSTP
Support STP Root Guard
Support BPDU Guard
Support Smart Link/Smart Link Multi-instance
Support RRPP/RRPP Multi-instance
MAC address table:Support 32K MAC addresses
Support black-hole MAC addresses
Support setting the maximum number of MAC addresses that can be learned at a port
IP routing:Support static route
Support RIP v1/v2,RIPng
Support OSPF v1/v2,OSPF v3
Support BGP, BGP4+ for IPV6
Support ECMP
Support routing policies
Support VRRP,VRRPv3
Support Policy Based Routing
MCE:Support MCE(Multi-VRF)
IPv6:Support Neighbor Discovery (ND)
Support PMTU
Support IPv6 Ping and IPv6 Tracert
Support IPv6 Telnet, TFTP
Support manual configuration of tunnels
Support 6to4 tunnels
Support ISATAP tunnels
Multicast:Support IGMP Snooping v1/v2/v3, MLD Snooping v1/v2
Support IGMP v1/v2/v3, MLD v1/v2
Support MVR
Support PIM-DM, PIM-SM, PIM-SSM, MSDP
Support MSDP,MSDP for IPv6
Support MBGP, MBGP for IPv6
QoS/ACL:ACL:
Support L2 ~ L4 packet filtering and provide flow classification based on the source MAC address, destination MAC address, source IP address (IPv4/IPv6), destination IP address (IPv4/IPv6), port, protocol or VLAN
Support Time Range
Support ACL policies in the ingress direction and the egress direction
Support port based and VLAN-based ACL
QoS:
Support bidirectional CAR (Committed Access Rate)
Support 8 output queues at each port
Support Weighted Fair Queuing
Support three scheduling modes: Strict Priority (SP), Weighted Round Robin (WRR) and SP+WRR
Support packet redirection.
Support re-labeling the 802.1p and DSCP priorities of a packet.
Mirror:Support flow mirroring
Support port mirroring(N:4)
Support RSPAN
Security:Support hierarchical management and password protection of users
Support Portal, EAD
Support AAA, Radius, and HWTacacs+ authentication
Support 802.1X authentication
Support centralized MAC address based authentication
Support Guest VLAN
Support SSH 2.0
Support port isolation
Support port security
Support binding of IP+MAC+port
Support IP Source Check, ARP detection
Support HTTPS
Management and Maintenance:Support loading and upgrade via the XModem, File Transfer Protocol (FTP), and Trivial File Transfer Protocol (TFTP)
Support configuration via CLI, Telnet, and Console port
Support SNMPv1/v2/v3, RMON
Support H3C iMC(Intelligent Management Centre), WEB management
Support HGMPv2
Support NTP
Support power alarms
Support fan and temperature alarms
Support the VCT (Virtual Cable Test) function
Support Device Link Detection Protocol (DLDP)
Support LLDP/LLDP-MED
Support 802.1AG/802.3AH
Support port loopback detection
Noise parameter:45.3dBA(low speed)
50.4dBA)(high speed)
MTBF(years):24.29